proof active_media_seal ams Trendsetter_400/800_Proofing The physical distance from the edge of the receiver to the starting point of the active media seal routine in (mm). When set to 0, the active media seal routine is disabled. The active media seal routine uses the vacuum roller to apply the pressure onto the donor such that bubbles are pushed out of the sealed media. uint16
  • 0
    •
  • 0 to 1200 mm
    •      cfg
  • ../commands/proof_media_seal.xmlCommand: proof media seal
    •
  • ..\..\ShowAllErrors.htmFirmware 0 Error Index
  • ..\..\ShowAllCommands.htmFirmware 0 Command Index
  • ..\..\ShowAllNVS.htmFirmware 0 NVS Index
    •  Updated: Wed Jul 16 19:37:26 2008 PST